222. Installation and ConnectionsAC INZOOMFOCUSSELECTLAMPSTATUSPOWERVIDEOS-VIDEOCOMPUTER-1 COMPUTER-2ON/STAND BYAUTOADJ.AUDIO OUTS-VIDEO INCOMPUTER 1 INCOMPUTER OUT PC CONTROLAUDIOAUDIOCOMPUTER 2 INVIDEO INAUDIOL/MONORAUDIOL/MONORConnecting the Supplied Power CableConnect the supplied power cable to the projector.First connect the supplied power cable's two-pin plug to the AC IN of the projector, and then connect the other plug ofthe supplied power cable in the wall outlet.Make sure that the prongs are fully inserted intoboth the AC IN and the wall outlet.To wall outlet ←CAUTION:Do not unplug the power cable from the wall outlet under any one of the following circumstances.Doing so can cause damage to the projector:• While the Hour Glass icon appears.• While the cooling fans are running. The cooling fans continue to work for 30 seconds after the projector isturned off.
