46OK iAUDIOSYS-TEMOPRAUDIOPr-12ACMSOSDONOFFOSDf1 2TIMEDATE DRVCRREC PRA BCOSDREC RECSYS-TEMOPRPr-12ACMSOSDPRONOFFOSDf1 2TIMEDATEOK iDRVCRA BCOSDAUDIOiAUDIOSYS-TEMPSETROPRPr-12ACMSOSDONOFFOSDf1 2TIMEDATE DRVCRSTEREOLEFTRIGHTMONOAUDIORECA BCOSDMENUi3 Press i button.OK4 Press CURSOR (FF/GG) to select “AUDIO” menu and press OK button.5 Press CURSOR (DD/EE) to select desired audio output mode.NOTES: If the audio output mode is set to STEREO while playing a pre-recorded bilingual audio programme, the primarylanguage (L) and the secondary language (R) will be heard simultaneously. If the VCR is connected to the TV through 75 Ohm coaxial cable, the audio portion of a stereo or bilingual pre-recorded tape will be heard in mono. Select the desired audio output mode when playing back a bilingual tape.