Using the SCU 4-11n SCU Password — Disabledn First Boot — Drive AThe default setting in the VGA submenu is as follows.n Display Mode — LCDThe default setting in the Memory submenu is as follows.n Cache Enable — Enabled.ExitHighlight Exit and press Enter to exit the SCU. The systemreboots when you exit the SCU, even if you made nochanges to the settings.n If you made no changes, the following system messageappears:ESC to exit nowAny other key to continuePress Esc to exit the utility. Press any other key to con-tinue making SCU selections.n If you changed any of the SCU settings, the followingscreen message appears.Do you wish to save your changes?ESC to exit – Enter to save and exitAny other key to continue If you press Esc, the system saves no changes, exitsthe SCU, and reboots the system. If you press Enter, the system writes the new setupvalues to backup battery memory, exits the SCU,and reboots the system. If you press any other key, the system returns you tothe SCU Main menu.
