NEC V323-2 Installation Manual

Also see for MultiSync V323-2: User manual

Contents

NEC V323-2 Installation Manual Manual pdf 1 page image

NEC Display Solutions of America, Inc.V323-2 Installation Guide32” LCD Display Rev 1.0www.necdisplay.com V323-2 Page 1 of 9ContentsProduct Description and Notes Page 1Tilt Angle and Rotation Page 1Ventilation Recommendations Page 2Display DimensionsFront, Top, Left, Right, Bottom Page 3Rear Page 4Optional Wall Mount Dimensions (WMK-3255S) Page 5Optional Wall Mount Dimensions (WMK-3257) Page 6Table Top Stand Dimensions Page 7Input Panel Page 8Control Codes Page 8Cable Connection Page 9Product DescriptionType: LCD Display Screen Surface: Anti-ReflectiveResolution: 1366 x 768 Dimensions without stand: 29.5”(W) x 17.5”(H) x 2.4”(D)Aspect Ratio: 16:9 Dimensions with stand: 29.5”(w) X 19.6”(h) X 6.8”(D)FCC: Class A Weight without stand: 20.9 lbsPower Consumption: 65W (max brightness/speaker active) Weight with stand: 23.8 lbsBTU’s: 221.79 BTU/hourNOTES: This document is intended to be used as a reference guide to supply useful information for a design or installation. It is notintended to be a step-by step procedure for installation. Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any localbuilding codes. All mounts should make secure contact to wood studs. 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontallyto fill the screen using the menus (see “Aspect Modes” in menus and user manual). Distances are in inches, for millimeters multiply by 25.4. Distances may vary ±5%.Tilt Angle and RotationBelow are the maximum angles that the monitor can be tilted in the landscape position only.