NEC PlasmaSync 50XR5 Supplementary Manual

Also see for 50XR5: Supplementary guide Supplementary guide Specifications Operation manual Installation guide

Contents

NEC PlasmaSync 50XR5 Supplementary Manual Manual pdf 4 page image

SpecificationsScreen Size 43.5"(H)24.5"(V) inches1106(H)622(V) mmdiagonal 50"Aspect Ratio 16 : 9Resolution 1365(H)768(V) pixelsPixel Pitch 0.032"(H)0.032"(V) inches0.81(H)0.81(V) mmColor Processing 4,096 steps, 68.7 billion colorsSignalsSynchronization Range Horizontal : 15.5 to 110.0 kHz(automatic : step scan)Vertical : 50.0 to 120.0 Hz(automatic : step scan)Input Signals RGB, NTSC (3.58/4.43), PAL (B,G,M,N),PAL60, SECAM, HD*1 , DVD*1Input TerminalsPC/RGBVisual 1 (Analog) mini D-sub 15-pin1VideoVisual 1 RCA1Visual 2 S-Video: DIN 4-pin1DVD/HDVisual 1 RCA-pin (Y, Cb/Pb, Cr/Pr)1* 1Visual 2 RCA-pin (Y, Cb/Pb, Cr/Pr)1*1HDMI HDMI connector2* 2Audio Stereo RCA3 (Selectable)External Control D-sub 9-pin1 (RS-232C)Sound output 9W+9W at 6 ohmPower Supply AC100-240V 50/60HzCurrent Rating 7.6A (maximum)Power Consumption 435W (typical)Dimensions 48.3 (W)30 (H)3.9 (D) inches1226 (W)736 (H)100 (D) mmWeight 97 lbs / 44 kg (without stand)Environmental ConsiderationsOperating Temperature 0°C to 40°C / 32°F to 104°FHumidity 20 to 80% (no condensation)Altitude 720 to 1114 hPa(0 to 9180 feet / 0 to 2800 m)Storage Temperature -10°C to 50°C / 14°F to 122°FHumidity 10 to 90% (no condensation)Altitude 700 to 1114 hPa(0 to 9840 feet / 0 to 3000 m)Other Features Motion compensated 3D Scan Converter (NTSC,PAL, 480I, 576I, 525I, 625I, 1035I, 1080I), 2-3pull down Converter (NTSC, 480I, 525I, 1035I,1080I (60Hz)), 2-2 pull down Converter (PAL,576I, 625I, NTSC, 480I, 525I), Digital ZoomFunction (100-900% Selectable), Self Diagnosis,Image Burn reduction tools (PEAK BRIGHT,ORBITER, INVERSE, WHITE, SCREENWIPER), Color Temperature select (high/middle/middle low/low, user has 4 memories), AutoPicture, Input Skip, Color Tune, Low Tone (3mode), Gamma Correction (4 mode), Plug andplay (DDC1, DDC2b, HDMI: E-DDC),Split screen operationsRegulations UL 60065, CAN/CSA-C22.2 No.60065-03,FCC class B, ICES-003 class BThe features and specifications may be subject to change withoutnotice.*1 DVD/HD input signals supported on this system.480P (60 Hz) 480I (60 Hz) 525P (60 Hz)525I (60 Hz) 576P (50 Hz) 576I (50 Hz)625P (50 Hz) 625I (50 Hz) 720P (60 Hz)720P (50 Hz) 1035I (60 Hz) 1080I (50 Hz)1080I (60 Hz) 1080P (50 Hz) 1080P (60 Hz)*2 HDMI input signals supported on this system.Supported Signals• 640480P @ 59.94/60Hz • 19201080I @ 50Hz• 1280720P @ 59.94/60Hz • 720576P @ 50Hz• 19201080I @ 59.94/60Hz • 1440 (720)576I @ 50Hz• 720480P @ 59.94/60Hz • 1280720P @ 50Hz• 1440 (720)480I @ 59.94/60HzNote: In some cases a signal on the plasma monitor may not be displayedproperly. The problem may be an inconsistency with standards fromthe source equipment (DVD, Set-top box, etc...). If you do experiencesuch a problem please contact NEC Solutions (America), Inc. and alsothe manufacturer of the source equipment.Units are in inch(mm)3.9"(100)1.6"(42) 2.3"(58)48.3" (1226)30" (736)43.5" (1106)24.5" (622)En-2For the operation of your plasma monitor,refer to “Operation Manual”.