NEC PlasmaSync 42XC10 Installation Manual

Also see for P42XC10 - PlasmaSync - 42" Plasma Panel: Brochure User manual Release note Specifications Specification sheet

Contents

product description

NEC PlasmaSync 42XC10 Installation Manual Manual pdf 1 page image

NEC Corporation of AmericaVisual Systems DivisionP42XC10 Installation Guide42” Plasma Display Rev 1.0www.necvisualsystems.com P42XC10 Page 1 of 10Contents:Product Description and Notes Page 1Ventilation Requirements Page 2Display DimensionsFront, Top, Bottom & Right Side Page 3Rear Page 4Display Dimensions w/Optional Speakers and Stand Page 5Optional Stand Dimensions Page 6Optional Speakers Dimensions Page 7Connections Page 8PC Control Page 9, 10Product DescriptionType: Plasma Display Screen Surface: Anti-ReflectiveResolution: 1024x768 Dimensions: 40.79”(W) x 25.55”(H) x 5.10”(D)Aspect Ratio: 16:9 Weight: 76.1 lbsFCC: Class BNotesThis document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended tobe a step-by step procedure for installation.Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any localbuilding codes. All mounts should make secure contact to wood studs.4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally tofill the screen using the menus (see “Aspect Modes” in menus and user manual).Distances are in inches, for millimeters multiply by 25.4.Distances may vary ±5%.Maximum Tilt AnglesBelow are the maximum angles that the display can be tilted in both landscape and portrait modeLandscape 20°Portrait 20°