NEC P462 Installation Manual

Also see for MultiSync P462: Specifications User manual Control guide Setup manual Specifications

Contents

NEC P462 Installation Manual Manual pdf 1 page image

NEC Display Solutions of America, Inc.P462 Installation Guide46” LCD Display Rev 1.0www.necdisplay.com P462 Page 1 of 9Contents:Product Description and Notes Page 1Tilt Angle and Rotation Page 1Ventilation Recommendations Page 2Display DimensionsFront, Top, Right and Left Side Page 3Rear & Bottom Page 4Display Dimensions w/Optional Stand Page 5Optional Table Top Stand Dimensions Page 6Optional Speaker Dimensions Page 7Dimensions with Optional Wall Mount (WMK-3257) Page 8Input Panels Page 9Control Codes Page 9Product DescriptionType: LCD Display Screen Surface: Anti-ReflectiveResolution: 1920 x 1080 Dimensions without stand: 41.6”(W) x 24.0”(H) x 4.1”(D)Aspect Ratio: 16:9 Dimensions with stand: 41.6”(W) x 25.4”(H) x 13.8” (D)FCC: Class B Weight without stand: 52.5 lbs / 23.8 kgPower Consumption: 155W (max) Weight with stand: 56.7 lbs / 25.7 kgBTU’s: 528.88 BTU/hourNOTES: This document is intended to be used as a reference guide to supply useful information for a design or installation. It is notintended to be a step-by step procedure for installation. Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any localbuilding codes. All mounts should make secure contact to wood studs. 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontallyto fill the screen using the menus (see “Aspect Modes” in menus and user manual). Distances are in inches, for millimeters multiply by 25.4.Tilt Angle and RotationBelow are the maximum angles that the monitor can be tilted in the landscape position only.Landscape/Portrait: 20degCLOCKWISE ROTATION ONLY MAXIMUM TILT ANGLE