122. Projecting an Image ( Basic Operation)❸ Turning on the Projector1. Remove the lens cap.With the lens cap’s stopper pressed up, pull forward andoff.Stopper2. Press the (POWER) button on the projector cabinetor the POWER ON button on the remote control.The POWER indicator lights blue and the image is projectedon the screen.TIP:• When the message “PROJECTOR IS LOCKED! ENTER YOURPASSWORD.” is displayed, it means that the [SECURITY]feature is turned on. (→ page 31)After you turn on your projector, ensure that the computeror video source is turned on.NOTE: When no input signal is present, the no-signal guidance isdisplayed (factory menu setting).Standby Blinking Power OnSteady red light Blinking bluelightSteady bluelight(→ page 125)
