NEC NP901W - WXGA LCD Projector Network Setup Manual

Also see for NP901W: Control commands Specifications Quick setup guide Installation guide User manual

Contents

NEC NP901W - WXGA LCD Projector Network Setup Manual Manual pdf 19 page image

194-2. Wireless LANWhen connecting the wireless LAN, configure the LAN settings in the “WIRELESS” page of“NETWORK SETTINGS” selected from On-Screen Menu.NoteThe wireless LAN cannot be used with VT800.■ Flow of SettingSetting of "CONNECTION".Select SSID in "SITE SURVEY".Input "SSID" (if necessary).Select "NETWORK TYPE" (if necessary).Select "CHANNEL" (if necessary).Setting of "SECURITY"Select "SECURITY TYPE".Select "KEY SELECT".Set "KEY 1 to KEY 4".If "EASY CONNECTION" is selected889101112131415161613Step Display "WIRELESS" page of "NETWORK SETTINGS".4Step Input "IP ADDRESS".2Step Select "PROFILES".5Step Input "SUBNET MASK".6Step Input "GATEWAY".7Step Input "DNS CONFIGURATION".17Step Finalize "ADVANCED".18Step Reconnect the network.19Step Finalize the setting.Step - Setting of "ADVANCED".Step Enable or disable "DHCP".If "Disabled" (without check mark) If "Enabled" (with check mark)4. Setting the LAN Setting of ProjectorSetting the LAN Setting of Projector4