NEC NP901W - WXGA LCD Projector Install Manual

Also see for NP901W: Control commands Specifications Quick setup guide Installation guide User manual

Contents

NEC NP901W - WXGA LCD Projector Install Manual Manual pdf 9 page image

9Select a wireless LAN compliant WPA-EAP or WPA-EAP authentication and install adigital certificate on the projector.❶ Set [DATE, TIME PRESET] on the pro-jector. (See previous page)❷ Use a computer to save digital certifi-cates (files) for WPA-EAP or WPA2-EAPsetting to your USB memory device.After completing saving the file, remove theUSB memory device from the computer.Important:• The file formats of digital certificate that are supported by the projector are DER andPKCS#1 only.• The projector cannot handle any digital certificate whose file size exceeds 8 KB.• CRL (Certificate Relocation List) is not supported.• Client certificate chain is not supported.❸ Plug the USB memory device into theUSB port of the projector.❹ Repeat steps ❶ on page 5 to ❽ on page6.The pull-down list will be displayed.❺ Use the SELECT ▼▲ button to select[WPA-EAP] or [WPA2-EAP] and pressthe ENTER button.❻ Use the SELECT ▼ button to select the[TKIP/AES] field and press the ENTERbutton.The pull-down list will be displayed.VIDEO INAUDIO INUSBLANAUDIO INHDMI INAUDIO INCOMPUTER /COMPONENT 2 INCOMPUTER /COMPONENT 1 INPC CONTROLMONITOR OUTAUDIO OUTS-VIDEO INAUDIO INL/MONOL/MONORRAC INUSBLAMPSTATUSSOURCEAUTO ADJUST3D REFORMSELECT( LAN)USBWIRELESSWIRELESSVIDEO INAUDIO INUSBLANAUDIO INHDMI INAUDIO INCOMPUTER /COMPONENT 2 INCOMPUTER /COMPONENT 1 INPC CONTROLMONITOR OUTAUDIO OUTS-VIDEO INAUDIO INL/MONOL/MONORRAC INUSBLAMPSTATUSSOURCEAUTO ADJUST3D REFORMSELECT( LAN)USBWIRELESSWIRELESS3. Setting WPA-EAP or WPA2-EAPUSB port