NEC NP64 User's Manual Supplement

Contents

specifications

NEC NP64 User's Manual Supplement Manual pdf 1 page image

NEC NP64G/NP63G/NP54G/NP43GUser’s Manual Supplement[English]This document provides information for customers who purchased the NP64G, NP63G,NP54G, or NP43G projector. Read this document as well as the Important Information, theQuick Setup Guide, and the User's Manual (CD-ROM) packaged with your projector.Main Power SwitchThe NP64G, NP63G, NP54G, and NP43G have the Main Power Switch on their rear panel.To turn on the NP64/NP63G/NP54G/NP43G, follow the steps below.1. Connect the power cable to the projector’ AC IN and the active wall outlet. (→ page 15of User’s Manual)2. Slide the lens cover to the right to uncover the lens. (→ page 5 of the User’s Manual)3. Press the Main Power Switch to the on position ( I ). The projector will go into standbymode. When in standby mode, the POWER indicator will light orange and the STATUSindicator will light green.4. Press the POWER (ON/STAND BY) button on the projector cabinet or the POWER ONbutton on the remote control for 1 second.The POWER indicator will turn to green and the projector will become ready to use. (→page 16 of User’s Manual)To turn off the projector, press the POWER (ON/STAND BY) button on the projectorcabinet or the POWER ON button on the remote control, press the Main Power Switch tothe off position (), and disconnect the power cable.