NEC NP-PH1400U Installation Manual

Also see for NP-PH1000U: Supplementary guide Quick setup guide Installation guide User manual Manual

Contents

NEC NP-PH1400U Installation Manual Manual pdf 1 page image

NEC Display Solutions of America, Inc.PH1000U/PH1400U Installation GuideDesktop and Ceiling Mount Rev 1.1www.necdisplay.com PH1000U/PH1400U Page 1 of 14ContentsProduct Description, Lens Specs, Screen/Aspect RatioNotes and Formulas Pg 1Distance Charts and Formulas Pg 1-2Ceiling Mount/Desktop Installation Pg 3-4Lens Shift Adjustable Range Pg 5Cabinet Dimensions (Front, Top, Left, Right, Back) Pg 6Cabinet Dimensions (Bottom) Pg 7Optional Lens Dimensions Pg 8-9Optional Mount Dimensions Pg 10-11Ventilation Requirements Pg 12Input Panel and Button Panel Pg 13Control Codes Pg 14Product DescriptionType: 3 chip DMD Reflection Type Dimensions: 25.7”(W) x 13.1”(H) x 27.6”(D)0.96 in. 2x LVDS DMD Weight: 87.1 lbs. / 39.5kgResolution: 1920 x 1200 (16:10) Brightness: PH1000U: 11,000 LumensFan Noise: PH1000U: 43 dB / 39dB @ 1 meter PH1400U: 14,000 LumensPH1400U: 48 dB / 44dB @ 1 meterPower Consumption: PH1000U: 1100W (max) BTU’s: PH1000U: 3754 BTU/hourPH1400U: 1215W (max) PH1400U: 4146 BTU/hourNetwork Ready, integrated wired and wireless adapterPowered: Horizontal & Vertical Lens Shift, Zoom, FocusLens SpecificationsNP25FL: Throw Ratio: ~ 0.67:1 Focal Length: 14.6mm NP28ZL: Throw Ratio: 2.56 -4.16:1 Focal Length: 52.4 – 85.3mmScreen Sizes: 77”-215” F/#: 2.5 Screen Sizes: 100-500” F/#: 2.5NP26ZL: Throw Ratio: 1.39 - 1.87:1 Focal Length: 28.9 – 38.9mm NP29ZL: Throw Ratio: 4.16 – 6.96:1 Focal Length: 84.9 – 142mmScreen Sizes: 100-500” F/#: 2.5 ___ ______ Screen Sizes: 100-500” F/#: 2.5NP27ZL: Throw Ratio: 1.87. – 2.56:1 Focal Length: 39.0 – 53.4mm NP32ZL: Throw Ratio: 0.9 – 1.1:1 Focal Length: 19.4 – 23.3mmScreen Sizes: 100-500” F/#: 2.5 Screen Sizes: 70-600” F#: Wide - 2.5Tele – 2.7Screen/Aspect Ratio4:3, 16:9 and 16:10 screens are fully supported with proper aspect ratio control for both type sources using NEC developedscaling technology. Menu selections have settings for each screen type and aspect ratio control for each source type.Notes For screen sizes not indicated on the projection tables, use the formulas below.If the figures on the tables do not match the results of formulas, use the figures in the table.. Distances are in inches, for millimeters multiply by 25.4. Distances may vary 5%.Formulas: 16:10 Aspect Ratio (PH1000U—WUXGA)The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image sizevaries. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below tocalculate all screen dimensions. Plug in the image width for “W” in the Projection Formulas.Refer to the diagrams and charts for popular screen sizes on page 2 and 3:Projection Formulas: Definitions: 16:10 Screen FormulasNP25FL: C = 0.707W – 3.15 W = Image Width W = H x 16/10NP26ZL: C(Wide) = 1.395W – 3.676 ------ C(Tele) = 1.877W – 3.592 H = Image Height (size) H = W x 10/16NP27ZL: C(Wide) = 1.883W – 3.425 ------ C(Tele) = 2.576W – 3.425 C = Throw distance Screen Diagonal = W x 18.868/16NP28ZL: C(Wide) = 2.530W + 7.750 ------ C(Tele) = 4.112W + 7.469 16:9 Screen FormulasNP29ZL: C(Wide) = 4.092W + 9.770 ------ C(Tele) = 6.850W + 9.699 W = H x 16/9NP32ZL: C(Wide) = 0.927W - 2.671 ------ C(Tele) = 1.115W - 2.671 H = W x 9/16Screen Diagonal = W x 18.358/16