NEC NEAX 2400 IPX User Manual

Also see for Dterm IP: User guide Technical specifications User guide User guide User guide

Contents

NEC NEAX 2400 IPX User Manual Manual pdf 45 page image

– 41 –Dial IntercomTo initiateLift handset or press the Speaker key.Press DICM key.Dial desired intercom station number. Receive ringback tone.To answerDICM LED flashes, indicating an incoming intercom call.Press DICM.Lift handset or press Speaker. LCD shows solid green.If called station is engaged in a non-intercom call,the station may press DICM after placing the original call on hold(with the Hold key.)To bridge into a dial intercom callNote: Bridging is an optional feature.Press the DICM key, lift handset or press Speaker.A three-party conference is established.Note: Dial intercom provides a Dial Intercom group where each member of the group may be called by a 1- or 2-digitnumber without using their prime lines.Called party4:26 PM TUE 13 APR 2004ICM 2Calling party4:26 PM TUE 13 APR 2004ICM 2Overriding party4:26 PM TUE 13 APR 2004OVERRIDE 34:26 PM TUE 13 APR 2004CONF