NEC MultiSync E1100+ User Manual

NEC MultiSync E1100+ User Manual Manual pdf 9 page image

7Controls cont.GlobalSync® Control: Eliminates picture impurities that may result from theearth’s magnetic field. Adjusting the control bar will change the display’s rotationin a clockwise or counterclockwide direction.Note: NEC recommends that you perform GlobalSync correction while running atypical application such as a spreadsheet or text document.Factory Preset: Selecting Factory Preset allows you a reset most OSM™ controlsettings back to the factory settings. A warning statement will appear to confirmthat you do want to reset ALL settings. Individual settings can be reset by high-lighting the control to be reset and pressing the RESET button.Tools 2Language: OSM controls menus are available in seven languages.OSM Turn Off: The OSM controls menu will stay on as long as it is in use. In theOSM Turn Off sub-menu, you can select how long the monitor waits after the lasttouch of a button for the OSM controls menu to disappear. The preset choicesare 10, 20, 30, 60 and 120 seconds.OSM Lock Out: This control completely locks out access to all OSM controlsfunctions except Brightness and Contrast. When attempting to activate OSMcontrols while in the lock out mode, a screen will appear indicating that OSMcontrols are locked out. To activate the OSM Lock Out function, press PROCEED,then press and hold down simultaneously. To deactivate the OSM Lock Out,press PROCEED, then press and hold down simultaneously.IPM ™ System Off Mode: Enable: The IPM System worksnormally and all stages ofenergy savings are utilized.Disable: The Off Mode of the IPMSystem is not used.NOTE: For standard systems and graphics boards, keep the factory settingat ENABLE.Refresh Notifier: A message will advise you if the refresh rate of the signal beingapplied to the monitor by the computer is too low. For further information, pleaserefer to your display card or system manual.InformationDisplay Mode: Indicates the current mode and frequency setting of the monitor.Monitor Info: Indicates the model and serial numbers of your monitor.78133724.wpc 11/18/98, 11:52 AM9