NEC MOBILEPRO 900C - RELEASE NOTES Release Note

Also see for MOBILEPRO 900C: User guide Brochure

NEC MOBILEPRO 900C - RELEASE NOTES Release Note Manual pdf 1 page image

NEC MobilePro 900cRelease NotesCongratulations on purchasing an NEC MobilePro™ 900c Handheld PC. Beforeusing your MobilePro 900c, please read the following important information.Installing the NEC USB Sync DriversNEC USB Sync drivers are required to recognize the NEC MobilePro 900c whenthe MobilePro is connected to the host PC via a USB cable. The NEC USB Syncdrivers come on the NEC MobilePro 900c Application and Driver CD.Use the following procedure to install the drivers on the host/companion PC.Note The following procedure replaces the section “Loading USB Files” inChapter 1 of the NEC MobilePro 900c User’s Guide.1. Insert the NEC MobilePro 900c Application and Driver CD in theCD-ROM drive of your host PC. If auto-insert is enabled on your hostPC, the CE Setup menu appears. If auto-insert is not enabled, go to Start,Run, and browse for the CD-ROM drive.2. Select “NEC 900 Drivers” from the displayed menu.3. Follow the on-screen instructions to complete the driver installation.4. Connect the USB PC Link cable from the MobilePro 900c to the host PC.Microsoft® Windows® now detects the new hardware (USB device).5. Click Next to install the USB drivers. The installation prompts you for thewceusbsh.sys file.6. Browse to the system32\drivers\ directory within Windows.7. Select the wceusbsh.sys file and click “Open” to complete the driverinstallation.Connecting to ActiveSync via the NetworkTo connect to ActiveSync® using a network connection, do the following: Check that the MobilePro is already partnered with the host system. Make sure the MobilePro and the host system are on the SAME network. Ensure that Outlook is open on the host system BEFOREsynchronization.To connect to ActiveSync using the network, click the Start button and select Run.Type repllog.exe /remote.1