NEC MM2000 User Manual

Also see for MM2000: Brochure

NEC MM2000 User Manual Manual pdf 10 page image

21-1. Features• 3D Motion Adaptive I/P Conversion Supports a Multi-directional Filter for HDTVDiffering from the conventional 3D Motion Adaptive interpolation method, this provides optimum interpolation even in obliquedirections of the moving image. Therefore, image quality performance of image contents are drawn out to the maximum limitwhen converting to progressive signals.Because from the beginning there are 3:2 and 2:2 pull down signals for the image contents, to be compatible to animationformats, bad editing signals and super-imposed scroll signals, there is no feeling of incongruity such as in scene changes. Thismakes it possible to enjoy the contents more.• Full 10-bit Image Processing CircuitThere is color 10-bit image processing circuits from the slot interface to the output unit. When inputting signals from the optionalSDI interface slot, there is complete 10-bit processing up to the interface unit of the projector. This makes it possible to attainimages with high-bit depth.• Per-pixel Motion Adaptive Noise ReductionWhen the SDTV signal is input, it is possible to cancel out noise without blurring the contours of the image by detecting thenoise component in the input image on one pixel basis. The “residual images” in which images flow behind the moving objectswill not occur by processing to correspond to the motions in the input image.• Equipped with 4 slots which can accommodate 4 types of interface boardsThis Switcher is equipped with 4 slots which permit the insertion of the following 4 types of optional interface boards. Multipleinterface boards of the same type can also be inserted.Connectors of the Various BoardsMM-VIDEO* ...... CVBS input connector (BNC), S-Video input connector (BNC 2 conductors), Component videoinput connector (BNC 3 conductors)MM-RGB* ......... RGB input connector (BNC 5 conductors)MM-SDI ............ SDI input connector (BNC)x2, monitor output connector (BNC)MM-DVI ............ DVI-D input connector (DVI-D 24 pin)* When shipped from the factory this Switcher is installed with one MM-VIDEO board and one MM-RGB board.1.Introduction