414. Using the VIEWER11. Press the ▶ button to move the cursor to , thenpress the ENTER button.The picture will rotate clockwise by 90°.• Every time you press the ENTER button in this state,the picture rotates 90° clockwise.12. Press the ▶ button to move the cursor to , thenpress the ENTER button.The control bar disappears.13. Press the EXIT button.The display changes to the file list screen.• You can also move the cursor to with the control barof the step 10 and press the ENTER button to changethe file list screen.• To return to the slide screen from the file list screen,move the cursor to the picture to be displayed in theslideshow and press the ENTER button.② Remove the USB memory1. Press the MENU button in the file list screen or drivelist screen.A pop-up menu will be displayed at the bottom left of thescreen.• Press the MENU button while the pop-up menu isbeing displayed to display the [INPUT] screen. Whenyou press the MENU button again, the [INPUT] screendisappears.• When you press the EXIT button while the pop-upmenu is being displayed, the pop-up menu disappears.2. Move the cursor to [REMOVE USB DEVICE] and pressthe ENTER button.A confirmation message will be displayed in the center ofthe screen.3. To remove the USB memory, press the ◀ button tomove the cursor to [OK] and press the ENTER button.The message displayed in the center of the screenchanges.4. Press the ENTER button.
