394. Using the VIEWER❷ Projecting the pictures on a USB memory (basic operation)This section explains the basic operations of the VIEWER. This is the operating procedure when the option menu(→ page 46) of the VIEWER is in the default state when shipped from the factory.① Start the VIEWER1. Turn on the projector.2. Insert a USB memory into the USB-A port of theprojector.NOTE:To remove a USB memory from the projector, press the MENUbutton in the file list screen or DRIVE LIST screen and select[REMOVE USB DEVICE]. (→ Page 41 “Remove the USB memory”)3. Press the INPUT button.The [INPUT] screen is displayed.• Press the SOURCE button when using the remotecontrol.4. Press the INPUT button a few times and move thecursor to [USB-A].• Every time the INPUT button is pressed briefly, thecursor moves to the next input terminal.• Move the cursor to [USB-A] and wait for a while forthe VIEWER to start and the DRIVE LIST screen on theUSB memory to be projected.5. Check that the cursor is moved to [USB 1] and pressthe ENTER button.The file list screen will be displayed.
