3-16 Configuring Your SystemConfiguration Settings MenuThe Configuration Settings Menu lists the following selections.Configuration SettingsMenuHost Adapter SettingsSCSI Device SettingsSCSI Bus SettingsAutoconfigure SCSI DevicesSelectable Boot SettingsRestore Default AdapterSettingsRaw Nvram DataHost Adapter Settings SubmenuFeatureChoices orDisplay Only Description Your SettingBIOS Address — (Display Only).BIOS Revision — (Display Only).Interrupt Level — (Display Only).Host Adapter BIOS EnabledDisabledSpecify whether the BIOSextension of the host adapteris enabled or disabled.PCI Bus DMA Burst EnabledDisabledSpecify whether the DMA bursttransfer on the PCI bus isenabled or disabled.CDROM Boot EnabledDisabledSpecify whether the start fromCD-ROM is enabled ordisabled.AdapterConfigurationAutoManualSafeSpecify whether the adapterconfiguration is setautomatically by BIOS,manually, or safely.Drivers Load RISC EnabledDisabledSpecify whether the load ofRISC codes is enabled ordisabled.>4GbyteAddressingEnabledDisabledSpecify whether hard disks of4 GB or larger are used or notused.Fast CommandPortingEnabledDisabledFactory set. Do not change.
