NEC EA241WM-BK-R User Manual

Also see for EA241WM-BK - MultiSync - 24" LCD Monitor: Specifications

Contents

NEC EA241WM-BK-R User Manual Manual pdf 11 page image

EnglishEnglish-9Remove Monitor Stand for MountingTo prepare the monitor for alternate mounting purposes:1. Place hands on each side of the monitor and lift up to the highest position. Remove the cable cover(Figure S.1).NOTE: If you have difficulty removing the cable cover, please push the lower opening upward to remove it,as shown in the figure beside.2. Disconnect all cables.3. Place monitor face down on a non-abrasive surface (Figure S.2).NOTE: Handle with care when monitor facing down, for avoiding the damage to the front buttons.4. Remove the 4 screws connecting the stand to the monitor (Figure S.2).NOTE: In order to avoid stand drop, when removing screws, please support stand with your hand.Screen RotationBefore rotating, the screen must be raised to the highest level to avoid knocking the screen on the desk or pinching with yourfingers.To raise the screen, with one hand, grip the top of the display by the handle using the other hand to grip the bottom. Lift up tothe highest position (Figure RL.1).To rotate screen, place hands on each side of the monitor screen and turn clockwise from Landscape to Portrait or counter-clockwise from Portrait to Landscape (Figure R.1).Figure R.1Figure S.1 Figure S.25. Remove the stand (Figure S.3).6. The monitor is now ready for mounting in an alternate manner.7. Connect the cables to the back of the monitor.Figure S.3