NEC DT700 User Manual

Also see for DT700 Series: User guide Quick reference guide Quick reference guide User manual

Contents

NEC DT700 User Manual Manual pdf 1 page image

SIP Handset User Guide*If you forget or lose your passcode it can be reset to the default by an administrator, please email: telephones@essex.ac.ukISS (Telecoms) [Publish Date] C:\Users\dwjoll\AppData\Local\Microsoft\Windows\INetCache\Content.Outlook\76WE6Q4W\TELS 005 SIP phone 4(DT 700) features 20180316 4.docxSIP Handsets NEC DT700 - Features quick referenceInitialise a call1. Receiver: lift the receiver to answer or start dialling to make a call (or to take call off speaker at any time).2. Speaker: dial number and then press the dynamic button ‘Dial’ (bottom left when numbers inputted).3. Speaker: press static button ‘Speaker’ then dial number.VoicemailPress this button to automatically dial the voicemail server. The receiver can be left in place to use the speaker whilstdoing this.Call Transfer1. Press the ‘Transfer’ button and wait for dial tone before dialling extension. The transfer can be completedwithout the dialled extension being answered. Complete transfer by replacing the receiver or pressing the‘Transfer’ button again.2. If you need to retrieve the original call use dynamic buttons ‘End call’, then ‘Resume’ (bottom right of LEDscreen).Call Pick upTo use the group pick up feature dial *84 or if a speed dial button has been assigned to the extension that is ringing,press this speed button to pick up the call (replicating *84).5. ProgrammableButtons(2-12 only)7. Feature Button8. Menu Button9. Speaker Button3. Hold Button6. NewCall/EndCall1. Voicemail2. Exit ButtonDynamic LED screenoptions such as ‘Voicemail’‘NewCall’ are multi-functional and toggled bybuttons outlined in theyellow boxes to the right.Select WheelLast NoRedialSelectbuttonDirectoryMenuPressing the ‘Menu’ button enables access to the following options that aredisplayed on LED screen (to exit press ‘Menu’ again):1. Personal Directory2. Call History3. User settings – ring tone, display brightness, clear user settings etc4. Admin Settings (PIN protected Administrator system configuration)5. Reboot Phone (see below for instructions)6. Status – information is displayedTo select an option either press the corresponding number on the keypad ornavigate using the ‘Select Wheel’ and ‘Select button’.Static buttons e.g. ‘Exit’and ‘Menu’ have onefunction and are labelled inwhite print.2. TransferFigure 1

/ 2

Related manuals for NEC DT700 Series