Product Guide – NEC Express5800/120Rf-2October, 200311NEC EXPRESSBUILDER System Installation SoftwareNEC Express5800/120Rf-2 systems come with NEC EXPRESSBUIDER set-up and configurationsoftware that provides a logical and comprehensive process for your server installation.Degradation FeatureThe degradation feature automatically isolates a failed DIMM or processor to assure continuousoperation of the server when the POST (Power on Self-Test, self-diagnosis program after power on)detects such a DIMM or processor.Remote Power-On Feature (Wake On LAN)NEC Express5800/120Rf-2’s system board supports Wake-on-LAN. The remote power-on functionturns on the server through a network. It sends a special packet from the management computer to aremote server to turn it on if the server is off-powered.System Security and Front Bezel RemovingTo help prevent unauthorized entry or use of the system, the system includes a full lockable frontbezel and Server Management software that monitors the front bezel intrusion switch.• Security with mechanical locks and monitoring:The front bezel contains a mechanical lock and an intrusion switch toprevent access to the computer chassis. When the cover is opened, theswitch transmits an alarm signal to the system board, where servermanagement software processes the signal.• Software Locks via the system set up utilityThe BIOS set up utility provides a number of security features to preventunauthorized or accidental access to the system. Once the security measures areenabled, access to the system is allowed only after the user enters the correctpassword(s). For example:- Enable the keyboard lockout timer so that the server requires a password to reactivatethe keyboard and mouse after a specified time-out period (1 to 120 min)- Set and enable an administrative password- Set and enable a user password- Set secure mode to prevent keyboard or mouse input and to prevent use of the frontpanel reset and power switches- Disable writing to the diskette drive when secure mode is set.21A