Chapter 7: BIOS SetupEntering Setup1. Connect an alphanumeric USB keyboard to the terminal.2. Apply power to the terminal.3. When you see the NCR logo displayed, press [Del] or [F2].Selecting Menu OptionsThe following keyboard controls are used to select the various menu options and tomake changes to their values.• Use the arrow keys to select (highlight) options and menu screens.• Use the [Enter] key to select a submenu.• Use the [+] and [-] keys to change field values.• To view help information on the possible selections for the highlighted item, press[F1].• To save the changes, move the cursor to the Save and Exit Menu, select SaveChanges & Reset, and press [Enter].Restoring Factory SettingsTo reset all values to their default settings, press [F3] and then [Enter] when theconfirmation message is displayed. The terminal automatically loads the BIOS defaultvalues. To save the factory default values, go to the Save and Exit Menu, select SaveChanges & Reset, and select [Enter].
