Menu
NBS Technologies Advantage M8 Operation Manual
                                                                | |
Contents
| 
11Card Issuing1. Turn the power ON after connecting the power cable and the communication cables.2. The following message will be indicated on the Main display.TP Warm-up xx%(Warming up is not completed when using Tipper.)Not initialized(Warming up is completed when using Tipper, or not using Tipper.)3. Initialization triggered by the host computer.Initializing...(During initialization)4. When initialization is completed, the message will be changed.Issuing Mode5. When received Issuing data from the host computer, Issuing operation is started.Card Issuing6. Issued card will be stored in the Card Stacker or ejected to the Card Insertion/Exit Slot.7. Error card will be transferred to the Reject Box.• If any error is detected during initialization, an error message is indicated on the Maindisplay.Please refer to “Error message” in this manual about the details and its measures.Reference• Do not insert a card or cover the Card Insertion/Exit Slot during the operation.• If you open the Front cover, Side door, or the Top cover during the operation, it will stopissuing the card. Do not reuse the canceled card because the data was not beprocessed correctly. You can restart the machine by turning off and on.• In the case when the machine got turned off because of power failure or other reasons,open the Front cover to remove the Hopper cassette. Make sure that the card does notcome out from the rear side of the Hopper cassette, and then turn on the machineagain.Caution |
Related manuals for NBS Technologies Advantage M8
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved