Page 506-2-4-2 I/O Test1. Select ‘I/O TEST’ from the Game Test Menu. The following screen is displayed.2. Press the Service button to select the required item then press the Test button.3. Press the Service button to select ‘EXIT’ then press the Test button to return tothe Game Test Menu Screen.(a) GO TO [I/F] INITIALIZENote: It is important that this test is selected following any changes oradjustments to the Steering, Brake or Accelerator assemblies. Failure toInitialize will result in incorrect operation of the game.1. Press the Service button to select GO TO [I/F] INITIALIZE and press the Testbutton. The following screen is displayed.2. Ensure that the Steering Wheel is at the centre position,and the Accelerator andBrake pedals are fully up.Press the Service button. Initialization is completedautomatically and the screen will change to the SWITCH TEST screen.(see (b) SWITCH TEST) on the next page.SELECT WITH SERVICE BUTTONAND PRESS TEST BUTTONI/O TESTGO TO [I/F]INITIALIZESWITCH TESTLAMP TESTCAMERA CHECKEXIT(a)(b)(c)(d)GO TO [SWITCH TEST]I/O TESTI/F INITIALIZESTEERING +000GAS 000BRAKE 000KEEP HANDLEBAR CENTER ANDPRESS SERVICE TO STORE THE RESULT
