NAD T531 Owner's Manual

Also see for T 531: Service information Owner's manual

Contents

NAD T531 Owner's Manual Manual pdf 13 page image

ConnectionsGB13NOTES• Refer to the owner’s manual of your TV as well.• Before you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making anyconnections.• Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, the playback picture will be distorted because DVD video discsare copy protected.• In case of the TV set corresponding to RGB signal, the RGB signal is automatically selected in the TV (Only when the VIDEO OUTPUT Switch is setto COMPONENT on the Rear Panel).WARNINGDo not set the Digital Audio Output of this DVD player to Dolby Digital unless you are connecting the DIGITAL OUT jack of this DVD player to an AVdecoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers (Refer to Selecting DigitalAudio Output on page 20).VIDEOOUTVIDEOOUTPUTLRS-VIDEOOUTCOAXIALDIGITALOUTOPTICALDIGITALOUTAUDIOOUTS-VIDEOCOMPONENTTO TVPALNTSCAUTOCONNECTING TO A TVTo SCARTVIDEO OUTPUT SELECT switch21-pin SCART cable (not supplied)To S-VIDEO OUT To AUDIO (L/R)/VIDEO OUTAudio/Video cable (supplied)To video inputTo audio inputTo S-video input TV or monitor withaudio/video inputsTo 21-pin SCART socketFor using SCART’s RGB signal, set the VIDEOOUTPUT switch to COMPONENT or for usingS-VIDEO OUT jack, set the VIDEO OUTPUTswitch to S-VIDEOIf the TV has an S-video input,connect the DVD player with theS-video cable.