NAD MDC2 BluOS-D Mounting Instructions

Also see for MDC2 BluOS-D: Mounting instructions

NAD MDC2 BluOS-D Mounting Instructions Manual pdf 1 page image

®MDC2 BluOS-DMounting InstructionsWHAT’S IN THE BOXINSTALL MDC2 BLUOS-DSTEP ARemove the MDC Classic cover and top cover by loosening and taking out thescrews holding them in place.STEP B1 Take note of the unique Wi-Fi MAC address (the same can be found on the MDC2BluOS-D metal back plate). This is needed when configuring the MDC2 BluOS-D.2 Remove the protective tape from the contact terminals.3 Slide MDC2 BluOS-D module through the rail pushing all the way to thecorresponding connectors.4 Make sure MDC2 BluOS-D module is locked in.Use corresponding screws to fix back into place MDC2 BluOS-D module and topcover.43IMPORTANT NOTES• MDC2 BluOS-D can be integrated with the following compatible NADproducts – C369, C389 and C399.• The reference model used in this mounting instruction is C 399.21This PCB assembly includes static sensitivecomponents, take appropriate precautions.nadelectronics.com/product/mdc2-bluos-dsupport.nadelectronics.com

/ 2

Related manuals for NAD MDC2 BluOS-D