1 o (STANDBY) BUTTON• Touch the o (Standby) button on top side of the front panelto switch ON the M50.2 from standby mode. Press and holdo (Standby) button until M50.2 switches back to standby mode.• One press or touch of the o (Standby) button will not switch theM50.2 to standby mode. This is intended to avoid unintentionallysetting the M50.2 to standby mode if one happens to just touch orpress the o (Standby) button at operating mode.• The Status indicator will change to amber color at standby mode.IMPORTANT NOTESFor the o (Standby) button to activate, the following must occur:a The supplied power cord from the M50.2 must be plugged in to apower source.b The rear panel POWER switch must be set to ON.2 STATUS INDICATORThis is an indicator of network connectivity. Below is a table of the LEDblink codes and their corresponding descriptions.LED BLINK CODE DESCRIPTIONAlternate flashing red and green Upgrade modeRed Powering up, rebootingSolid green Hotspot modeSolid red Booting upSolid red Cannot boot up; drive errorSolid white IndexingSolid blue Connected to network – ready to usewith BluOS App3 DISPLAY (TOUCH PANEL DISPLAY)• Display visual information about current music or media source.• Touch control functions are also displayed depending upon thesource or media.SAMPLE DISPLAY SCREENA Large Album Artwork Display (Now Playing)1 New screen is opened showing Main Menu options (refer to MainMenu display below).2 Large album art cover.3 Internal hard drive indicator.4 Disc loaded in the disc slot is ejected.5 Information about album, artist and music name.6 Logo or icon for music service provider or media source input(analog, optical, coaxial, audio, Bluetooth, USB)7 Playback controls for applicable media (song, title, file, music stationand others).0 Skip to next media.u/j Play or pause current media.9 Skip back to previous media.IDENTIFICATION OF CONTROLSFRONT PANEL© NAD M50.24 512 3kNow PlayingAlicia KeysHERECDWork On It9 0j12435676ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ