NAD HTR-3 Owner's Manual

Contents

NAD HTR-3 Owner's Manual Manual pdf 5 page image

COPY A COMMAND FROM ANOTHER KEYYou may copy a command from any HTR 3 key to any other.To copy a key function, after entering the Learning Mode, andpressing the desired key to be copied to, simply press thedevice key from which you wish to copy, having first pressedits DEVICE SELECTOR key if it resides on another “page.” Thestatus LED will turn green; press the DEVICE SELECTOR keyagain to exit Learning Mode.Example: Copy the Pause command from the CD page to theAMP [ ] button:• On the HTR 3, simultaneously press-and-hold [AMP] and[RES]; the Learn LED turns steady green.• Press Pause [ ] ; the Learn LED turns amber.• Press [CD]; press Pause [ ] ; the Learn LED turns green.• Press [AMP] again to exit the learning mode.NOTEThe copy and punch-through functions are similar.However, if you copy a command and then subsequentlydelete, or over-write the original (source-key) command ,the copied-to key’s command remains unchanged. If youpunch-through to a command and then delete or over-write the original key, the punched-through functions alsochange accordingly.MACRO COMMANDSA “macro” command is a series of two or more remote codesissued automatically from a single keypress. You might usea macro to automate a simple command sequence, suchas, “Turn on the DVD player and then press ‘play.’” Or youmight compose an elaborate macro to power up an entiresystem, select a source, choose a Listening Mode, and beginplayback—again, all from a single keypress. The HTR 3 canstore one macro on each of its function keys (these exclude theDEVICE SELECTOR keys).NOTEMacros are independent of the currently selected device.RECORDING MACROSTo record a macro, simultaneously press-and-hold for 3seconds both the [MACRO] key and the HTR 3 function key towhich you wish to assign the macro, until the status LED turnsgreen. The macro button will also light up.Press the sequence of function keys to be recorded into themacro, being sure to first press the requisite DEVICE SELECTORkey for each function (you may switch devices while recordingthe macro as many times as necessary), allowing you to createmacro containing commands from more than one DEVICESELECTOR “page.”When you have finished entering the desired commandsequence, press [MACRO] again to store the macro; the LearnLED and [MACRO] key illumination will turn off.NOTEEach macro can store a maximum of 64 commandsteps. If you exceed this number, the macro will be storedautomatically after the 64th command is added.ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙHTR3_eng_OM_v02.indd 5 7/8/07 22:03:26