NAD C717 Owner's Manual

Also see for C717: Specifications

Contents

NAD C717 Owner's Manual Manual pdf 13 page image

ADJUSTING TONE AND BALANCE CONTROLSToggle the [TONE/BALANCE] button to step through the following modes- “BASS”, “TREBLE” or “BALANCE CENTER”. Select the feature you want toadjust and within 3 seconds, turn [SCROLL/PUSH/ENTER] clockwise orcounterclockwise to change the level settings.baSS and trebleTreble and bass controls only affect the low bass and high treble leaving thecritical midrange frequencies free of coloration. Maximum and minimumvalues for both Tone Control levels are ±10dB.balanceThe BALANCE control adjusts the relative levels of the left and rightspeakers. The BALANCE CENTER position provides equal level to the left andright channels. BALANCE can be adjusted to the following levels - “BALANCER+1” up to “BALANCE R or “BALANCE L+1” up to “BALANCE L +6”.FACTORY DEFAULT SETTINGSSometimes power spikes and drop-outs may from time to time cause someinadvertent functionality. The procedure below will set the C 717 to factorydefault settings1 Turn OFF C 717 by pressing the STANDBY button in the front panel orSR 9 remote control’s [OFF] key.2 Press and hold front panel’s [TUNER MODE], [SOURCE] and STANDBYbuttons for more than two seconds. The C 717 will switch itself backON. “SERVICE MODE” will be shown in the upper line of the VFD andbelow it are details about the current software program.3 Press and hold [TUNER MODE] button and release it as soon as the VFDblinks. The C 717 will switch itself to standby mode. The C 717 is nowrestored to its factory default settings.Please note that setting the C 717 to factory default will delete all AM andFM presets. The timer settings will also be restarted.SETUPSetting up the c 7171ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ