N-Tron 405FX-SC Installation Manual

Also see for 405FX-SC: Installation guide

Contents

safety warnings

N-Tron 405FX-SC Installation Manual Manual pdf 4 page image

(Revised 2010-11-15) 4Safety WarningsELECTRICAL SAFETYWARNING: Do not disconnect while circuit is live, unless area is known to be non-hazardous.WARNING: Disconnect the power cable before removing the enclosure top.WARNING: Do not operate the unit with the top cover removed.WARNING: Properly ground the unit before connecting anything else to the unit. Units not properlygrounded may result in a safety risk and could be hazardous and may void the warranty. See thegrounding technique section of this user manual for proper ways to ground the unit.WARNING: Do not work on equipment or cables during periods of lightning activity.WARNING: Do not perform any services on the unit unless qualified to do so.WARNING: Do not block the air vents.WARNING: Observe proper DC Voltage polarity when installing power input cables. Reversingvoltage polarity can cause permanent damage to the unit and void the warranty.Power must be supplied by an isolating source, and a 0.5 A max rated UL recognized fuse must beinstalled immediately before the unitLASER SAFETY (405FXE Only)CAUTION: CLASS 1 LASER PRODUCT. Do not stare into the laser!)