Menu
Mitsubishi Electric SP-321V Quick Start Manual
 |
SP-321VOptional Accessory Speakers for LDT321V LCD MonitorMITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.Presentation Products DivisionToll Free: 888.307.03479Email: ppdinfo@mdea.comwww.mitsubishi-presentations.comCanadaMitsubishi Electric Sales Canada Inc.Information TechnologiesPhone:905.475.7728: tsupport@mdea.mea.comwww.mitsubishielectric.ca©2007 Mitsubishi Digital Electronics America,Inc. Standard features, options andspecifications subject to change withoutnotice. All trademarks are the property of theirrespective holders.Part Number SP-321V (designed forLDT321V)FrequencyResponse 100Hz – 20kHzPower 7W + 7W @ 8 ohms with10% THDDimensions (WxHxD) 2.9” x 18.75” x 3.3”73.6 x 476 x 83.82mmWeight 2.0 lbs (net)ContentsSpeakers (2), Speaker wire(2), Mounting brackets (4),Speaker screws (12), QuickStart GuideFollow these steps to connect the speakers toyour LCD monitor:1. Turn off the power switch on the LCD.2. Screw appropriate mounting brackets into theappropriate position on each speaker (2brackets per speaker) using black screws.Figure 1. (2 screws per bracket.)3. Screw mounting brackets / speakers to theLCD using one (1) black screw per bracket.Figure 2.4. Once both speakers are attached to the LCD,connect the speaker wires to the terminals onthe LCD and then to the terminals onattached speakers. Figure 3.5. Turn the LCD power on.1.6”(41mm)18.75”(476mm)1.2”(30mm)9.2”(234mm)2.9”(73.7mm)3.3”(83.8mm)1.2”(30mm) |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved