Menu
Mitsubishi Electric RMF-CA200-V2 Installation Instructions Manual
     |
1IM-RMF-CA200-V2-202306FM © Mitsubishi Electric Sales Canada Inc. All rights reserved.RMF-CA200-V2Installation / Instruction Manual – Read prior to installing / operating device. Retain for future reference.Contents1.0 Parts .................................................................................................................................................. 11.1 Supplied Parts ................................................................................................................................... 11.2 Optional Parts ................................................................................................................................... 12.0 Safety Precautions ............................................................................................................................ 13.0 Installation ........................................................................................................................................ 23.1 Single Stage and Two-Stage Conventional Connection Diagram ...................................................... 23.2 Heat Pump Mode Connection Diagram ............................................................................................ 33.3 DIP Switch Settings............................................................................................................................ 34.0 System Configuration ........................................................................................................................ 45.0 Operation Instruction........................................................................................................................ 51.0 Parts1.1 Supplied PartsRMF-CA200-V2 thermostat interface (1), Manual (1)1.2 Optional Parts24VAC Transformer (ULP24-210) sold separately from Mitsubishi Electric2.0 Safety PrecautionsTHOROUGHLY READ THE FOLLOWING SAFETY PRECAUTIONS BEFORE EACH USE OF THIS PRODUCT (THE “DEVICE”).WARNING – INCORRECT HANDLING MAY RESULT IN INJURY, MALFUNCTION AND / OR DAMAGE TO DEVICE• Do not expose the device to or immerse the device in water. Doing so could lead to electrical shock, device malfunction or damage.• Do not install the device in a bathroom, kitchen, or any room where steam could form. Condensation could develop on or around thedevice and cause electrical shock, device malfunction or damage.• Do not install the device in a location where a gas leak could occur.• Do not expose the device to heat or radiation, including direct sunlight, or install the device in a location where the temperature couldbe greater than 40°C (104°F) or less than 0°C (32°F). Doing any of these things could result in device deformation or malfunction.• Always ensure the device is installed in an area without exposure to high frequency noise.• Power generators, inverters, and high-frequency or radio communication equipment may interfere with the operation of this device.• All electrical work should be performed by a qualified technician and in accordance with applicable laws and the instructions outlined inthis manual.• Use standard wiring with the proper current capacity to avoid current leak, excessive heat, and fire.• Use only specified cables and wiring; securely connect each so that the terminals do not bear any weight.• Include slack in the power supply wiring. Tension in the wiring may cause it to excessively heat up and break, which could result in a fire.• Improperly connected or short-circuited cables or wiring may produce heat and cause device malfunction, device damage, and fire.• Capacity shortage to the power supply circuit or improper installation may result in electrical shock or fire.• Do not modify or alter this device or cable in any manner whatsoever. |
Related manuals for Mitsubishi Electric RMF-CA200-V2
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved