Mitsubishi Electric PAC-IH03V-E Installation Manual

CYLINDER UNIT OPTIONAL PARTSIMMERSION HEATER (1Ph 3kW)PAC-IH03V-EWARNING●●●●●INSTALLATION MANUALIf the cylinder has already been connected to the power supply ensure circuit breaker is off before carrying out electricalwork.If the immersion heater is installed incorrectly or modified after installation by the user water leakage, electric shock orfire may result.All electrical work should be performed by a qualified technician according to local regulations and the instructions givenin this manual.The immersion heater must be powered by a dedicated power supply and the correct voltage and correctly sized circuitbreakers must be used.Connections must be made securely and without tension on the terminals.The included component parts of the PAC-IH03V-E IMMERSION HEATER (1Ph 3kW) shall be used only for the purposesindicated in the installation manual.● Before starting installation, read the following description together with the installation manual included with the cylinder unit.● Please read carefully and observe fully the following safety precautions.Precaution that must be observed to prevent injuries or death.WARNINGAfter installation carry out a test run to ensure correct operation, then explain operation method and safety precautions to theend user.Tell your customers to keep this installation manual together with the operation manual, and when they give or sell thismachine to any other person include this installation manual and operation manual with it.●ItemImmersion heaterThermostat (High limit thermal cut-out)Tab coverEarth leakage breakerScrew (4×25)RelayScrew (4×16)Label (for Earth leakage breaker)Label (for Relay)Lead wire with connectorLead wire (Red, 100mm)Lead wire (Blue, 100mm)Lead wire (Red, 1500mm)Lead wire (Blue, 1500mm)Water-proof coverWater-proof seal (3x35x25)Water-proof seal (3x40x25)BandToolInstallation manualPiece11112121111111111111ContentsBH79D212H02

/ 2

Related manuals for Mitsubishi Electric PAC-IH03V-E