Menu
Mitsubishi Electric MR-HDP01 Installation Manual
 | |
Contents |
General-Purpose AC ServoManual Pulse GeneratorModelMR-HDP01Installation Guide CHEAD OFFICE: TOKYO BLDG MARUNOUCHI TOKYO 100-8310IB(NA)67182ENG-C(1704)MEE Printed in Japan Specifications are subject to change without notice.Thank you for choosing this product. This guide is the installation guide for theManual Pulse Generator (MR-HDP01). To ensure safety, always read through thisguide and the instruction manual of the servo amplifier used before using thisproduct. What is not written in this guide is described in the instruction manual ofthe servo amplifier.Please forward this guide and other attached documents to the customer who willuse this product. Also, always keep this guide and other documents.1. SPECIFICATIONSItem SpecificationsPower supply Voltage 4.5 V DC to 13.2 V DCConsumption current 60 mA or lessInterface Maximum output current: 20 mA for open collector outputPulse signal form A-phase/B-phase, 2 signals of 90˚ phase differencePulse resolution 100 pulses/revMaximum speed Instantaneous maximum: 600 r/min, normal: 200 r/minTemperature range for operation -10 °C to 60 °CTemperature range for storage -30 °C to 80 °C2. DIMENSIONS [Unit: mm]φ50φ703.6 Packing t2.016 20 8.89 7.6Invalid to use except M3 × 63-M4 stud L10P.C.D72 Equal intervals0.27 ± 0.5φ60 ± 0.1φ80 ± 13. MOUNTING [Unit: mm]φ62 +203-φ4.8Equal intervalsPanel cutφ72 ± 0.24. TERMINAL ASSIGNMENT0V+5 to12V A BSignal name Description+5 to 12V Power supply input0V Common for power and signalA A-phase output pulseB B-phase output pulse |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved