Menu
Mitsubishi Electric HD-6000 Service Manual
Also see for HD-6000: Owner's guide
                                                      |
CAUTION:Before servicing this chassis, it is important that the service person read the "SAFETY PRECAUTIONS" and"PRODUCT SAFETY NOTICE" contained in this manual.• Design specifications are subject to change without notice.MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.9351 Jeronimo Road, Irvine, CA 92618-1904Copyright © 2005 Mitsubishi Digital Electronics America, Inc.All Rights ReservedMITSUBISHI ELECTRICSerSerSerSerServiceviceviceviceviceManualManualManualManualManual20052005200520052005SET TOP BOXV26S CHASSISSPECIFICATIONS• Power Input : AC 120V, 60Hz• Power Usage : 82W• Frequency Range : VHF 54 ~ 470MHzUHF 470 ~ 806MHzAnalog Cable - 1 ~ 125Digital Cable - 1 ~ 135• Antenna Input : 2 RF 75Ω unbalanced• Tuning : 1 NTSC/ATSC/QAM1 CableCARD™ Slot1 NTSC for PIP• Cabinet Dimensions : 17"(W) x 3.4"(H) x 16.8"(D)• Weight : 27 lbs• PVR : 120 GB Hard DiscApprox. 12 hrs HD Recording72 hrs SD Recording• Analog Input : VIDEO IN JACK (RCA Type)Levels 1.0Vp-p 75Ω unbalanced: AUDIO IN JACK (RCA Type)-4.7dBm 43kΩ unbalanced: S-VIDEO IN JACK(Y/C separate type)Y:1.0 Vp-p C:0.286Vp-p(BURST)75Ω unbalanced: COMP / Y, Cr, Cb (RCA Type)Y: 1.0 Vp-p Cr, Cb: 700mVp-p: ATV / Y(G), Pr(R), Pb(B), H, VY: 1.0Vp-p with sync 75Ω (BNC)Pr, Pb: 700mV 75ΩH, V: 3.0Vp-p 75Ω: VGA / R,G,B,V,H (15 pin D)• Output Level : VIDEO OUT JACK (RCA Type)1.0Vp-p 75Ω unbalanced: COMP / Y,Cr,CbY: 1.0 Vp-p Cr, Cb: 700mVp-p: AUDIO OUT JACK (RCA Type)-4.7dBm 4.7kΩ unbalanced• Digital : IEEE-1394 I/O JacksInterface : AC-3 Digtal Audio Output: HDMI™ Input/Output: MonitorLink TM Control/RS-232C: CableCARD™ Slot: NetCommand®.MODELHD-6000 |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved