TECHNICAL BULLETIN [ 1 / 9 ]FA-A-0326-CHEAD OFFICE : TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPANNAGOYA WORKS : 1-14 , YADA-MINAMI 5-CHOME , HIGASHI-KU, NAGOYA , JAPANApplicable Network Cameras for Camera Recorder ModuleDate of IssueFebruary 2021 (Ver. C: July 2021)Relevant ModelsRD81RC96-CAThank you for your continued support of Mitsubishi Electric programmable controllers, MELSEC iQ-R series.This bulletin introduces network cameras applicable to a camera recorder module.For the product availability, please contact the manufacturer.1 PRECAUTIONSSpecifications of the applicable products are subject to change without notice.Before using the product, please read "SAFETY PRECAUTIONS" of User's Manual.For precautions on wiring of each product, refer to the manual for the product.1.1 Precautions for Network CamerasNetwork cameras manufactured by Axis Communications• The capture mode and power line frequency must be set according to a frame rate to be set in a camera recorder module.(Page 5 Setting an IP address etc.)For the specifications of the capture mode, refer to the manual for a network camera.Network cameras manufactured by CANON INC.• If a resolution to be set in a camera recorder module or GOT does not appear in the communication test screen in themodule extended parameter, change the setting of the video size set for a network camera. (Page 7 Setting a videosize set)• If neither PTZ operation nor preset movement is available, release the camera control authority.For details on the setting method, refer to the manual for a network camera used.Network cameras manufactured by Panasonic i-PRO Sensing Solutions Co., Ltd.• If a resolution to be set in a camera recorder module or GOT does not appear in the communication test screen in themodule extended parameter, change the setting of the image capture mode for a network camera. (Page 9 Setting animage capture mode)For details on the setting method, refer to the manual for a network camera used.