Menu
Mitsubishi Electric AT-50A Installation Manual
Also see for AT-50A: Instruction book
                | |
Contents |
– 1 –Chapter 1. InstallationThoroughly read the following safety precautions prior to installation. Refer to Chapter 2. “Initial Setting” in this manual, and the Instruction Book forinformation on operating or making the settings for the controller. Also, refer to the air conditioning unit installation manuals for how to connect cables or howto install air conditioning units.1-1. Safety Precautions• Thoroughly read the following safety precautions prior to installation.• Observe the following precautions to ensure safety.• Nomenclature• After reading this manual, pass it on to the end user to retain for future reference.• Keep this manual for future reference and refer to it as necessary. This manual should be made available to those who repair or relocate the controller.Make sure that the manual is passed on to any future AT-50A users.WARNINGCAUTIONWARNINGCAUTIONWARNING Indicates a risk of death or serious injury.CAUTION Indicates a risk of serious injury or structural damage.(Prohibited actions) (Do not touch) (No water) (No wet hands) (Fire hazards) (Electric shock hazards) (Injury hazards) (Important actions) (Grounding required)General precautionsPrecautions during installationAir-conditioner Control SystemAdvanced Touch Controller AT-50AInstallation Manual For distribution to dealers and contractorsWT06091X01All electric work must be performed by qualified personnel.Do not install the unit in a place where large amounts of oil, steam, organicsolvents, or corrosive gases, such as sulfuric gas, are present or where acidic/alkaline solutions or sprays are used frequently. These substances cancompromise the performance of the unit or cause certain components of theunit to corrode, which can result in electric shock, malfunctions, smoke, or fire.To reduce the risk of shorting, current leakage, electric shock, malfunctions,smoke, or fire, do not wash the controller with water or any other liquid.To reduce the risk of electric shock, malfunctions, smoke or fire, do not operatethe switches/buttons or touch other electrical parts with wet hands.To reduce the risk of injury or electric shock, before spraying a chemical aroundthe controller, stop the operation and cover the controller.To reduce the risk of injury or electric shock, stop the operation and switch offthe power supply before cleaning, maintaining, or inspecting the controller.Properly install all required covers to keep moisture and dust out of the controller.Dust accumulation and water can cause electric shock, smoke, or fire.To reduce the risk of injury, keep children away while installing, inspecting, orrepairing the controller.To reduce the risk of fire or explosion, do not place flammable materials or useflammable sprays around the controller.To reduce the risk of damage to the controller, do not directly spray insecticideor other flammable sprays on the controller.To reduce the risk of electric shock or malfunctions, do not touch the touchpanel, switches, or buttons with a pointy or sharp object.To reduce the risk of injury and electric shock, avoid contact with sharp edgesof certain parts.To avoid injury from broken glass, do not apply excessive force on the glassparts.To reduce the risk of injury, wear protective gear when working on thecontroller.Do not install the controller where there is a risk of leaking flammable gas.If flammable gas accumulates around the controller, it may ignite and cause afire or explosion.Properly dispose of the packing materials. Plastic bags pose suffocation hazardto children.Take appropriate safety measures against earthquakes to prevent thecontroller from causing injury.To prevent injury, install the controller on a flat surface strong enough tosupport its weight.To reduce the risk of shorting, current leakage, electric shock, malfunctions,smoke, or fire, do not install the controller in a place exposed to water or in acondensing environment.Controller must be installed by qualified personnel according to the instructionsdetailed in the Installation Manual.Improper installation may result in electric shock or fire. |
Related manuals for Mitsubishi Electric AT-50A
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved