216 Part Number 80-1230-9 10/10Evaporator Re-Build KitsAn Evaporator Re-Build Kit is now available for out ofwarranty Flake and Chiplet Ice Machine evaporators.Defective in warranty evaporators must be replaced,the warranty does not allow re-building. There are kitsfor different sized evaporators as well evaporators thatmay need the auger changed.• Evaporators can only be re-built with the kit.• When an evaporator is disassembled all partsmust be replaced.• Parts are not available individually, only in kit form.Included in the kit is a special tool that is required fordisassembly/reassembly. The tool is used for bearingremoval, proper seating of bearings and water seal.IDENTIFYING CORRECT KIT:The augers inside of the evaporators are stamped witha letter, the letter indicates the date (A=2000, B=2001,C=2002, etc.). Remove the top cap on the auger andwipe off the grease to see the stamped letter. Use thechart below to determine the proper kit.Re-Build Kit Part NumbersStamped A or BModel Re-Build Kit Re-Build Kitwith AugerQF400Stainless Steel Evap 76-0166-3 76-0167-3QC700 76-0168-3 76-0169-3QF800 76-0168-3 76-0170-3QF2300 76-0171-3 76-0172-3All OthersModel Re-Build Kit Re-Build Kitwith AugerQF400 76-0166-3 76-0167-3QC700 76-0166-3 76-0169-3QF800 76-0166-3 76-0170-3QF2300 76-0171-3 76-0172-3
