106 Part Number 80-1230-9 10/10AUTOMATIC SHUT-OFF3A. Ice Run OutIce will build up in the bin until it contacts the bin levelprobe. After ice contacts the bin level probe for 30continuous seconds the compressor de-energizes. Toallow excess ice to run out, the gear motor and thewater float valve solenoid remain energized for anadditional 4 minutes, then de-energize.3B. Water DrainTo allow water to drain from the evaporator, the dumpvalve energizes for 45 seconds, then de-energizes.An 8-minute lockout starts when the compressor de-energizes. When the ice drops away from the bin levelprobe the ice machine will begin an initial start-upcycle, provided the “8-minute lockout” has expired.8 Minute LockoutThe bin level light will flash until the 8-minute lockoutexpires.After the 8 minute lockout expires the bin level light willde-energize.The 8 minute lockout time can be overridden bymoving the ON/OFF/CLEAN toggle switch from ICE toOFF then back to ICE.Flush Sequence in the “ICE” PositionAfter the ice machine has run for 100 hours the icemachine will stop making ice and perform a flushsequence. The flush sequence will remove mineralsthat have settled in the bottom of the evaporator. Theentire flush sequence lasts approximately 11 minutes,after which the ice machine automatically resumes icemaking and the 100 hour counter in the control boardresets to zero.Flake ice machines use an auger to remove ice fromthe evaporator. Occasional noises (creaks, groans, orpops) are normal.
