Menu
Mammoth MAM8X8LBF Setup Instructions
  |
MAMMOTH MODULAR DISPLAYMAMMOTH 8FT DISPLAY (BACKLIT)PRODUCT CODE: MAM8X8LBFSET UP INSTRUCTIONSPage 1 of 2a. Slide the Split Connectors into the groovesof the frame and tightenb. Attach other extrusion onto the Split Connector. c. Tighten screws with included 5mm allenwrench.a. Insert the Corner Connectorlocks into the ends of the frame.a. Line up the holes on feet with holeson the bottom horizontal frame piece.b. Insert screws and washers intohole to secure feet to frame.b. Insert End Lock into top and bot-tom grooves of frame. Tighten screwswith torx key to secure connection.1. Attach Split Connectors to Top, Bottom, & Side Extrusions:2. Attach Corner Connectors:4. Make Support Strut: 5. Attach Support Strut To Frame:3. Install Feet:b. Then attach side extrusion ontothe Corner Connector. Tighten screwswith included 5mm allen wrench.a. Remove screws fromCenter Connector.a. End Lock is already attached toopposite ends of Support Strut.b. Insert Center Con-nector and align holeswith holes on extrusion.c. Repeat to connectother extrusion to makeone long piece.112 22 21 15543 3 |
Related manuals for Mammoth MAM8X8LBF
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved