Makita VR001G Instruction Manual

Also see for VR001G: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

7 ENGLISHUninstallation1. Open the battery case while pressing the buttonson sides of the battery case.2. Slide the battery cartridge off from the tool whilepressing the button on front of the battery cartridge.12Fig.6► 1. Button 2. Battery cartridge3. Close the battery case securely.For cord connected power sourceOptional accessoryReplace the standard equipped battery case with anoptional battery case H before installation.Installation1. Open the battery case while pressing the buttonson sides of the battery case.2. Insert a battery adapter in place aligning its tonguewith the groove on the tool. If you can see the red indi-cator as shown in the figure, it is not locked completely.12Fig.7► 1. Red indicator 2. Battery adapter3. Open the rubber sealing grommet in the battery case.Make sure to squeeze the rubber sealing grommet out ofthe round hole rim from inside the front cover of the case.21Fig.8► 1. Rubber sealing grommet 2. Front cover4. Pass the adapter plug and plug cord through theround hole in the battery case.123Fig.9► 1. Adapter plug 2. Plug cord 3. Battery adapter5. Close the battery case securely.6. Place the rubber sealing grommet back in place.123Fig.10► 1. Rubber sealing grommet 2. Plug cord 3. Battery case