Makita UT2204 Instruction Manual

Also see for UT2204: Brochure Instruction manual Instruction manual Instruction manual Instruction manual

4 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel: UT2204No load speed 550 min -1Maximum mixing blade diameter 220 mmOverall length 929 mmNet weight 2.7 kgSafety class /II• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2014Intended useThe tool is intended for mixing wall materials, etc.(except flammable materials).Power supplyThe tool should be connected only to a power supply ofthe same voltage as indicated on the nameplate, andcan only be operated on single-phase AC supply. Theyare double-insulated and can, therefore, also be usedfrom sockets without earth wire.NoiseThe typical A-weighted noise level determined accord-ing to EN62841-2-10:Sound pressure level (LpA) : 86 dB (A)Sound power level (LWA) : 94 dB (A)Uncertainty (K) : 3 dB (A)NOTE: The declared noise emission value(s) hasbeen measured in accordance with a standard testmethod and may be used for comparing one tool withanother.NOTE: The declared noise emission value(s)may also be used in a preliminary assessment ofexposure.WARNING: Wear ear protection.WARNING: The noise emission during actualuse of the power tool can differ from the declaredvalue(s) depending on the ways in which thetool is used especially what kind of workpiece isprocessed.WARNING: Be sure to identify safety mea-sures to protect the operator that are based on anestimation of exposure in the actual conditions ofuse (taking account of all parts of the operatingcycle such as the times when the tool is switchedoff and when it is running idle in addition to thetrigger time).VibrationThe vibration total value (tri-axial vector sum) deter-mined according to EN62841-2-10:Work mode: operation without loadVibration emission (a h) : 2.5 m/s2 or lessUncertainty (K) : 1.5 m/s2NOTE: The declared vibration total value(s) has beenmeasured in accordance with a standard test methodand may be used for comparing one tool with another.NOTE: The declared vibration total value(s) may alsobe used in a preliminary assessment of exposure.WARNING: The vibration emission duringactual use of the power tool can differ from thedeclared value(s) depending on the ways in whichthe tool is used especially what kind of workpieceis processed.WARNING: Be sure to identify safety mea-sures to protect the operator that are based on anestimation of exposure in the actual conditions ofuse (taking account of all parts of the operatingcycle such as the times when the tool is switchedoff and when it is running idle in addition to thetrigger time).Declarations of ConformityFor European countries onlyThe Declarations of conformity are included in Annex Ato this instruction manual.SAFETY WARNINGSGeneral power tool safety warningsWARNING Read all safety warnings, instruc-tions, illustrations and specifications provided withthis power tool. Failure to follow all instructions listedbelow may result in electric shock, fire and/or seriousinjury.