Makita UC3030A Instruction Manual

Also see for UC3030A: Spare parts list Instruction manual Instruction manual Owner's and safety manual Instruction manual

Contents

Makita UC3030A Instruction Manual Manual pdf 16 page image

16ASaw chain oilUse a special oil with adhesive addition for lubricating the sawchain and bar. The adhesive addition prevents that the oil iscentrifuged too fast from the sawing device.Do not use mineral oils. In order to protect the invironment theuse of biologically decomposeable oil is prescribed.The saw chain oil sold by MAKITA, called BIOTOP, is made ofspecial vegetable oils and is biologically decomposeable to 100%.BIOTOP has been granted the “blue angel” for being particularlyfavourable to the environment (RAL UZ 48).BIOTOP oil is available in the following packing sizesto suit your individual requirements:1 liter order number 980 008 6105 liters order number 980 008 611Biologically decomposeable oil is stable only for alimited period of time. It should be consumed within2 years from the date of manufacture (printed on thecontainer).Waste oilNEVER USE WASTE OILWaste oil is very dangerous for the environment.Waste oil contains high amounts of carcinogenic substances.The residues in the waste oil result in a high degree of wear andtear at the oil pump and the sawing device.In the case of damage caused by using waste oil or unappropriatesaw chain oil the product guarantee will be null and void.Your salesman will inform you about the use of saw chain oil.AVOID SKIN AND EYE CONTACTSMineral oil products as well as oil degrease the skin. If your skinrepeatedly comes in contact with these substances for a longerperiod of time, it will desiccate. Various skin deseases may result.In addition, allergic reactions are known.Eyes can be irritated by contact with oil. If oil gets into your eyes,immediately wash them with clear water. If your eyes are stillirrritated, go to see a doctor.Important note on bio-degradable chain oilsIf you are not planning to use the saw again for an extendedperiod of time, empty the oil tank and put in a small amountof regular engine oil (SAE 30), and then run the saw fora time. This is necessary to flush out all remaining biodegradable oil from the oil tank, oil-feed system, chainand guide bar, as many such oils tend to leave stickyresidues over time, which can cause damage to the oilpump or other parts.The next time you use the saw, fill the tank with BIOTOPchain oil again. In case of damage caused by using wasteoil or unappropriate chain oil the product guarantee willbe null and void.Your salesman will inform you about the use of chain oil.B