Makita T220D Instruction Manual

Also see for T220D: Parts Breakdown

ADDITIONAL SAFETY RULES1. Always wear safety goggles or safety glasses with side shield, and a fullface shield when needed.2. Do not point the ejection port at anyone in the vicinity (especially his face).Keep hands and feet away from the ejection port area.3. Always remove the battery cartridge before loading the staples, adjustment,inspection, maintenance or after operation is over.4. Make sure no one is nearby before operation. Never attempt to drive staplesfrom both the inside and outside of wall at the same time. Staples may ripthrough and/or fly off, presenting a grave danger.5. Watch your footing and maintain your balance with the tool. Make sure thereis no one below when working in high locations.6. Check walls, ceilings, floors, roofing and the like carefully t o avoid possibleelectrical shock, gas leakage, explosions, etc. caused by stapling into livewires, conduits or gas pipes.7. Use only staples specified in this manual. The use of any other staples maycause malfunction of the tool.8. Do not tamper with the tool or attempt to use it for other than driving staples.9. Do not operate the tool without staples. It shortens the service life of the tool.IO. Stop driving operations immediately if you notice something wrong or outof the ordinary with the tool.11. Never staple into any materials which may allow the staple to puncture andfly through as a projectile.12. Never actuate the trigger switch and safety lever at the same time until youare prepared t o staple workpieces. Allow the workpiece to depress the safetylever. Never defeat its purpose by securing the safety lever back or bydepressing it by hand.13. Never tamper with the safety lever. Check the safety lever frequently forproper operations.SAVE THESE INSTRUCTIONS.6,