Makita PDC01 Instruction Manual

Also see for PDC01: Instruction manual Instruction manual Instruction manual Instruction manual

16 ENGLISHTROUBLESHOOTINGBefore asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual,do not attempt to dismantle the tool, machine, or unit. Instead, ask Makita Authorized Service Centers, always usingMakita replacement parts for repairs.State of abnormality Main power lamp Cause RemedyThe tool or machinedoes not start.The lamp lights up ingreen.The adapters are not installed to thetool or machine.Install the adapters to the tool ormachine.Check that the adapters are installedsecurely.The tool or machine, or the cords ofthe adapters are overheated.Cool down the tool or machine, unitand adapter. After cooling down,power off and then power on again.The tool or machine, or the unit isbroken.Ask Makita Authorized ServiceCenters for repair.The lamp blinks ingreen.The plug of the adapter or power tool/machine and the socket of the batterybox are not connected.Connect the plug and the socket.Check that the plug and socket areconnected securely.The remaining battery capacity is notenough.Charge the batteries, or replace thebatteries with charged ones.Two batteries are not installed tothe unit when using the unit with thebattery-powered tool or machine withhigher voltage than 18V.The remaining battery capacity of twobatteries is not enough.Install at least one battery to batteryport 1 or 2, and at least one battery tobattery port 3 or 4.Charge the batteries, or replace thebatteries with charged ones.The unit needs to switch the battery. Switch off the tool or machine, andthen back on.Press the power button of the unit.The cord of the unit is overheated. Cool down the unit.The lamp blinks in redand green alternately.The unit has detected an abnormality. Turn off the unit, and then back on.The tool or machine, or the unit isbroken.Ask Makita Authorized ServiceCenters for repair.The lamp does notlight up.The unit is not turned on. Turn on the unit.The batteries are not installed to theunit.Install the batteries to the unit.The remaining battery capacity is notenough.Charge the batteries, or replace thebatteries with charged ones.The unit is broken. Ask Makita Authorized ServiceCenters for repair.OPTIONALACCESSORIESCAUTION: These accessories or attachmentsare recommended for use with your Makita toolspecified in this manual. The use of any otheraccessories or attachments might present a risk ofinjury to persons. Only use accessory or attachmentfor its stated purpose.If you need any assistance for more details regard-ing these accessories, ask your local Makita ServiceCenter.• Makita genuine battery and charger• Adapters for 36 V (18 V x 2)• Adapter for 18 V• Adapter for 36 V - 40 VmaxNOTE: Some items in the list may be included in thetool package as standard accessories. They maydiffer from country to country.