Makita MR014G Instruction Manual

Also see for MR014G: Instruction manual Instruction manual

12 ENGLISHSelecting this option indicatesthat the LED light remainscontinuously illuminated.(Default)Selecting this option indicatesthat the LED light will flash withthe rhythm of the music. It ismore effective with music thathas a strong beat.Note: This feature is suitable for music with a strongrhythm. Otherwise, the LED light may not flash.EQUALIZER FUNCTION1. Press the Power button to switch on your speaker.2. Press the Menu button, then press the Play/Pausebutton to enter the EQ selection menu.3. Press the Next Track or Previous Track button toselect the desired equalizer mode or choose toconfigure your own equalizer mode. Then, pressthe Play/Pause button to confirm your selection.The available equalizer modes are: “FLAT”, “JAZZ”,“ROCK”, “CLASSIC”, “POP”, “NEWS”, and “MY EQ”.4. If “MY EQ” is chosen in step 3, use the Nexttrack, Previous track and Play/Pause buttons tosubsequently configure the treble, middle and basslevels.Note: If you increase the volume while emphasizing thebass with an equalizer, crackling or distortion may occur.In this case, adjust the volume.MICROPHONE SOCKETA 6.3mm microphone socket is provided on the rightside of your speaker for connecting the microphone (notsupplied).1. Connect the microphone to the microphone (MIC)socket.2. Press the Power button to switch on your speaker.3. Turn on the microphone.4. Press the volume up/down buttons on the speaker asneeded to adjust the desired level.Note:Do not place the microphone against the speaker, it cancause feedback echo and it will damage the speaker.Setting the Microphone volume1. Press the Power button to switch on your speaker.2. Press the Menu button, then press the Next Trackbutton to enter the settings.3. Press the Next Track or Previous Track buttonto select the desired microphone volume level.Then press the Play/Pause button to confirm yourselection.PLAYING MUSIC VIAAUXILIARY INPUT SOCKETA 3.5mm Auxiliary input socket is provided on the rightside of the unit for an audio signal from any devices thatfeatures a headphone or audio output, such as MP3 orCD player.1. Connect a stereo or mono audio source (for example,MP3 or CD player) to the Auxiliary input socket(marked ‘AUX IN’), the speaker will be switched fromBluetooth to auxiliary input mode.2. Adjust the Volume control on your MP3 or CD playerto ensure an adequate signal and then adjust thevolume on the speaker for comfortable listening.Note:In AUX IN mode, it is recommended to set the volume ofthe external audio device to two-thirds or higher. Then,adjust the speaker’s volume as needed to achieveoptimal sound quality. If the volume of the audio deviceis set lower than two-thirds, it is possible that the LEDlight will not flash.The display does not show the information such astitle, artist, album, etc., when playing via auxiliary inputsocket.MAINTENANCECAUTION:● Never use gasoline, benzine, thinner, alcohol orthe like. Discoloration, deformation or cracks mayresult.● Do not wash the speaker with water.