Menu
Makita LS0714 Instruction Manual
Also see for LS0714: Instruction manualInstruction manualInstruction manualParts BreakdownInstruction manual
                        | |
6INSTALLATIONBench mountingWhen the tool is shipped, the handle is locked in thelowered position by the stopper pin. Release the stopperpin by lowering the handle slightly and pulling the stopperpin.1003923This tool should be bolted with two bolts to a level andstable surface using the bolt holes provided in the tool'sbase. This will help prevent tipping and possible injury.1003924Turn the adjusting bolt clockwise or counterclockwise sothat it comes into a contact with the floor surface to keepthe tool stable.1003925FUNCTIONAL DESCRIPTIONWARNING:• Always be sure that the tool is switched off andunplugged before adjusting or checking function onthe tool.Blade guardFor all countries other than European countries1002252When lowering the handle, the blade guard risesautomatically. The guard is spring loaded so it returns toits original position when the cut is completed and thehandle is raised. NEVER DEFEAT OR REMOVE THEBLADE GUARD OR THE SPRING WHICH ATTACHESTO THE GUARD.In the interest of your personal safety, always maintainthe blade guard in good condition. Any irregularoperation of the blade guard should be correctedimmediately. Check to assure spring loaded return actionof guard. NEVER USE THE TOOL IF THE BLADEGUARD OR SPRING ARE DAMAGED, FAULTY ORREMOVED. DOING SO IS HIGHLY DANGEROUS ANDCAN CAUSE SERIOUS PERSONAL INJURY.For European countries12006661When lowering the handle, the blade guard A risesautomatically. The blade guard B rises as it contacts aworkpiece. The guards are spring loaded so it returns toits original position when the cut is completed and thehandle is raised. NEVER DEFEAT OR REMOVE THEBLADE GUARDS OR THE SPRING WHICH ATTACHESTO THE GUARD.In the interest of your personal safety, always maintaineach blade guard in good condition. Any irregularoperation of the blade guards should be corrected1. Blade guard A2. Blade guard B(For Europeancountries)1. Blade guard1. Adjusting bolt1. Bolt1. Stopper pin |
Related manuals for Makita LS0714
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved