Makita JR100D Instruction Manual

7Model JR100DSound pressure level (L pA ): 78 dB (A)Uncertainty (K): 3 dB (A)The noise level under working may exceed 80 dB (A).Model JR102DSound pressure level (L pA ): 77 dB (A)Uncertainty (K): 3 dB (A)The noise level under working may exceed 80 dB (A).Wear ear protection.Vibration ENG900-1The vibration total value (tri-axial vector sum) determinedaccording to EN60745:Model JR100DWork mode: cutting boardsVibration emission (ah,B): 9.5 m/s 2Uncertainty (K): 1.5 m/s 2Work mode: cutting wooden beamsVibration emission (ah,WB ): 9.5 m/s2Uncertainty (K): 2.5 m/s 2Model JR102DWork mode: cutting boardsVibration emission (ah,B): 8.0 m/s 2Uncertainty (K): 1.5 m/s 2Work mode: cutting wooden beamsVibration emission (ah,WB ): 7.0 m/s2Uncertainty (K): 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard test methodand may be used for comparing one tool with another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of the powertool can differ from the declared emission valuedepending on the ways in which the tool is used.• Be sure to identify safety measures to protect theoperator that are based on an estimation of exposure inthe actual conditions of use (taking account of all partsof the operating cycle such as the times when the toolis switched off and when it is running idle in addition tothe trigger time).For European countries only ENH101-15EC Declaration of ConformityWe Makita Corporation as the responsiblemanufacturer declare that the following Makitamachine(s):Designation of Machine:Cordless Recipro SawModel No./ Type: JR100D, JR102Dare of series production andConforms to the following European Directives:2006/42/ECAnd are manufactured in accordance with the followingstandards or standardised documents:EN60745The technical documentation is kept by our authorisedrepresentative in Europe who is:Makita International Europe Ltd.Michigan Drive, Tongwell,Milton Keynes, Bucks MK15 8JD, England3. 3. 2011Tomoyasu KatoDirectorMakita Corporation3-11-8, Sumiyoshi-cho,Anjo, Aichi, 446-8502, JAPAN