Makita HR4013C Technical Information

Also see for HR4013C: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Model No.DescriptionC ONCEPT AND MAIN APPLICATIONSS pecificationDimensions: mm (")Width (W)Height (H)Length (L) 479 (18-11/16)HR4013C112 (4-3/8)HR4003C106 (4-3/16)263 (10-3/8)HR4013C, HR4003C40mm (1-9/16") Rotary HammerModel HR4013C/HR4003C are the successor models of the currentHR4011C series models and developed to provide higher operatingefficiency and more comfort with unrivalled low level of vibration,the optional dust extractor attachment newly designed, etc.Listed below are the specification differences betweenHR4013C and HR4003C.S tandard equipmentNote: The standard equipment for the toolshown above may vary by country.Depth gauge (Stopper pole) ..........................1Side handle assembly (D-shaped) .................1Side handle (Bar style) ..................................1Bit grease ......................................................1Cleaning cloth ...............................................1Plastic carrying case ......................................1Optional accessoriesAssorted TCT drill bits Assorted Core bitsAssorted Bull points Assorted Cold chiselsAssorted Scaling chisels Scaling chisel (for Tile)Grooving chisel Shank (for Bushing tool and Rammer)Bushing tool RammerScoop Side handle assembly (D-shaped)Chemical anchor adaptor Bit GreaseHammer grease Safety GoggleBar style side handle Plastic carrying caseSyringe Hammer Service KitDust extractor attachmentWHL*Anti-Vibration TechnologyAVT*Active dynamic vibration absorberVibration absorbing housingSoft no loadHR4013C HR4003CYesYesYesNoNoNoPRODUCTP 1/ 19TECHNICAL INFORMATION(The image above is HR4013C.)Adapted for SDS-MAXShank type250 - 500No load speed: min.ˉ¹ = rpm1,450 - 2,900Impacts per minute: min.ˉ¹ = ipmWeight according toEPTA-Procedure 01/2003*: kg (lbs)Europe: 4.0 (13.1), Brazil, Chile, Peru: 2.0 (6.6),Other countries: 5.0 (16.4)Power supply cord: m (ft)Double insulation6.2 (13.8)6.8 (15.1)Protection from electric shockYesSoft startYesConstant speed controlNoYesSoft no loadYesTorque limiterCapacity: mm (")Electronic featuresConcrete 105 (4-1/8)40 (1-9/16)YesVariable speed control switchCore bitTCT bitHR4013C HR4003CSpecification Model* With Side handle (Bar style)240 6.2 50/60 1,100 1,500Continuous Rating (W)Voltage (V) Cycle (Hz) Input Output500Max. Output (W)11012022023012116.26.250/6050/6050/6050/601,1001,1001,1001,5001,5001,2001,200Current (A)500---550550550